Hi !
Thanks a lot for your help.
I can do it now.
Thanks and Best Regards.
Nam
From: Dmitry Perelman [mailto:[email protected]]
Sent: Thursday, August 20, 2009 21:49 PM
To: Nam, Nguyen Hoang
Cc: [email protected]
Subject: [?? Probable Spam] Re: [j-nsp] JNCIP Question about ssh-rsa key
The key format in the JNCIP book looks like it's SSH1 format, meaning the "1024
65537" portion is part of the key produced by the client. If you are adding
1024 in front of the "ssh-rsa" of an SSH2 public key, the router will reject it
because it is not in either format SSH1 or SSH2.
If you plan on using SSH2 start with "ssh-rsa" in the pub file.
You can test the SSH1 key in the book by manually copying it in starting at
"1024"
On Wed, Aug 19, 2009 at 9:08 PM, Nam, Nguyen Hoang
<[email protected]<mailto:[email protected]>> wrote:
Dear all !
I have problem when config ssh-rsa key in JNCIP example :
r...@r1# show root-authentication
encrypted-password $1$n/lx3$RNtF9uDlCsMsAL8gi/qA31 ; # SECRET-DATA ssh-rsa
1024 65537
14507521839282798432482521835023055326381401663452058669080886491465544700784
392
81114055822376198290722320666268020211763429857348456378696103199986915461962
494
35479692894437417780898017483440313841107367122670080439972894195679320796753
410
731222833899141869327583231170906047985814682544941905107416839803283 root ; #
SECRET-DATA
When I config ssh-rsa key begin "1024 ....
I see the following error : Must follow SSHv2 or SSHv1 RSA key format
When I config ssh-rsa key begin "ssh-rsa .... " It's OK
I use Junos version 8.5R3.4
When I don't use ssh-rsa key, I also can ssh to router.
My question is how to config ssh-rsa to affect the authentication
Thanks and Best Regards.
Nam
_______________________________________________
juniper-nsp mailing list
[email protected]<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
