Stacy, Tomohiko and Sridhar, Thank you for the help.
Li On Thu, Aug 27, 2009 at 12:35 AM, Stacy W. Smith <[email protected]> wrote: > 3,2,1 > > u...@host> show configuration groups groupA > protocols { > bgp { > group <*> { > neighbor <*> { > import policy-1; > } > } > } > } > > u...@host> show configuration groups groupB > protocols { > bgp { > group <*> { > neighbor <*> { > import policy-2; > } > } > } > } > > u...@host> show configuration protocols bgp > group MyGroup { > apply-groups groupA; > neighbor 10.0.0.1 { > apply-groups groupB; > import policy-3; > peer-as 6500; > } > } > > u...@host> show configuration protocols bgp | display inheritance > group MyGroup { > neighbor 10.0.0.1 { > ## > ## 'policy-2' was inherited from group 'groupB' > ## 'policy-1' was inherited from group 'groupA' > ## > import [ policy-3 policy-2 policy-1 ]; > peer-as 6500; > } > } > > --Stacy > > > > On Aug 26, 2009, at 10:18 PM, Li Zhu wrote: > > All, >> >> In configuration below, groupA and groupB import policy-statement 1 and 2, >> respectively. So, what is the sequence of import policy neighbor 10.0.0.1 >> should go through? Should it be >> 1. policy-statement-3, then 2, then 1? or >> 2. policy-statement-3 only? or >> 3 something else? >> >> group MyGroup { >> apply-groups [groupA]; >> neighbor 10.0.0.1 { >> apply-groups groupB; >> import policy-statement-3; >> } >> } >> >> Thanks, >> >> Li >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
