hi,
we use C2000 with E320 to provide web based authentication service.
On a new site we found C2000 could not control E320 even after we tried to
configure both sides serval times.
If E320 is configured with
' sscc enable' , client could acquire IP address by DHCP (DHCP server runs on
E320) but no access control policy is pushed to sub-interface , so our customer
could accesss internet without any authentication ;
if E320 is configured with 'sscc enable cops-pr', client could not get IP
address at all. At this time , C2000 logs like
'21:17:56.322 CST 29.09.2009 [CopsHandler-165/0x30003625] [AddressCtx] [10]
Will refuse address since SAP JunosESap { routerName = [email protected],
interfaceName = GigabitEthernet12/0/2.13311073} is not managed;
While, the interface is surely configured to be managed by C2000.
Would anybody do some favor to give some hints?
thanks in advance.
Joe
ps.
C2k version info :
C2K-2> show system information
System Identification
Hostname C2K-2
Manufacturer Juniper Networks
Product Name C2000
Version 1.0
Serial Number 0207072007000005
UUID 48384441-5254-0030-485C-0030485C71B2
Hostid eff6d312
Software version SRC-PE Release 2.0 [R.2.0.0-0] (November 30, 2007 08:01)
E320 version info :
BAS-E320-3.MAN#sh ver
Juniper Edge Routing Switch E320
Copyright (c) 1999-2008 Juniper Networks, Inc. All rights reserved.
System Release: e320_8-2-4p0-4.rel
Version: 8.2.4 patch-0.4 [BuildId 10198] (October 24, 2008 03:01)
System running for: 221 days, 11 hours, 31 minutes, 2 seconds
(since FRI FEB 20 2009 10:06:11 PRC)
___________________________________________________________
好玩贺卡等你发，邮箱贺卡全新上线！
http://card.mail.cn.yahoo.com/
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
