Any experience with interoperability issues between the EX3200 and the
Catalyst 6509? Can ping the Ethernet link between the two, however,
cannot ping any other subnets outside of the /30. The LAN subnet points
to the appropriate gateway, however, no success. Cisco running EIGRP, so
I did a redistribute into OSPF, which is enable of the EX3200. Any
ideas? Anyone.
~Jay Murphy
IP Network Specialist
"We move the information that moves your world."
"Good engineering demands that we understand what we're doing and why,
keep an open mind, and learn from experience."
"Engineering is about finding the sweet spot between what's solvable and
what isn't."
Radia Perlman
P Please consider the environment before printing e-mail
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If
you have received this email in error please notify the system manager. This
message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.
______________________________________________________________________
Confidentiality Notice: This e-mail,including all attachments is for the sole
use of the intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review,use,disclosure or distribution is
prohibited unless specifically provided under the New Mexico Inspection of
Public Records Act. If you are not the intended recipient, please contact the
sender and destroy all copies of this message.
This email has been scanned using Webroot Email Security.
______________________________________________________________________
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
