Hello, yes thats perfectly possible.
But take care, beginning with JunOS 9.2 (iirc) the old FPC is no longer supported AND will not work, only E-FPC will work. Regards, Jonas On Mon, 2009-10-19 at 13:02, iber-x wrote: > Hi all, > > does Juniper support an FPC and E - FPC at the same time within a M20?. > Attached the ouput of show chassis fpc detail command and note that > versions of I/O Manager ASIC information are different. > > Slot 0 information: > > State Online > > Logical slot 0 > > Temperature 26 degrees C / 78 degrees F > > Total CPU DRAM 32 MB > > Total SRAM 2 MB > > Total SDRAM 128 MB > > Total notification SDRAM 24 MB > > I/O Manager ASIC information Version 3.0, Foundry IBM, Part number 0 > > Start time 2009-06-06 18:52:23 CEST > > Uptime 131 days, 16 hours, 4 minutes, 11 seconds > > > Slot 1 information: > > State Online > > Logical slot 1 > > Temperature 27 degrees C / 80 degrees F > > Total CPU DRAM 8 MB > > Total SRAM 1 MB > > Total SDRAM 128 MB > > Total notification SDRAM 24 MB > > I/O Manager ASIC information Version 2.0, Foundry IBM, Part number 0 > > Start time 2009-10-15 11:17:34 CEST > > Uptime 23 hours, 39 minutes > > > Thanks > > Emilio > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
