On Mon, Oct 19, 2009 at 10:55:03PM +0100, I Goodall wrote: > Can anyone confirm if MPLS-CCC on a EX-4200s is compatable with EoMPLS (or > similar) on a Cisco 7600/RSP720? I can find references in the archives to > the M40s working but I know the features are quite limited on the EX > switches Just looking for port to port so nothing too complicated.
EoMPLS in Cisco speak is l2circuit in Juniper speak. I don't believe any sw for EX supports LDP yet, only IP->RSVP, so no this isn't currently supported. I think there are also some hardware limitations regarding the depth of the label stack that may make l2circuits running inside rsvp in a traditional deployment a problem, not sure what they're going to do to handle this (seeing as there is no LDP yet to even try :P). -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
