On Fri, Oct 30, 2009 at 05:35:45PM -0700, Judah Scott wrote: > The datasheet for the new MX 3D line cards is a little strange. Assuming > that a find-and-replace of "KB" to "K" will make it more coherent, this is > an awesome amount of queues when comparing to competitors. However, the new > FPC/PIC-like card strategy is in 30Gb/s and 60Gb/s flavors. Given that the > 16x10GE card is oversubscribed this looks like the old DPC 4x10Gb/s stacked > complex design (except now it is 4x30Gb/s?). I guess this because the > numbering is much like the DPC in that they are 0/0-3 1/0-3 2/0-3 3/0-3. > Would Juniper really come out with a 30Gb/s (full duplex) chipset? With no > 40GE announcement I can only assume this chipset is going to be damn hard > (or expensive) to do 40GE interfaces.
My understanding is that Trinity is more of an architecture than a single chip, so while the initial MX release will be 30Gbps per PFE the architecture itself is intended to support 40GE and 100GE in the future. The story I've heard is the 16x10GE card will be powered by (4) 30Gbps PFEs, with each group of 4 ports landing on a PFE. Each existing SCBs will be able to provide 10Gbps of fabric capacity to each PFE, and on MX960 you'll be able to run all 3 SCBs in parallel (instead of the current configuration of 2 active plus 1 in standby) to get your 30Gbps of fabric capacity per group of 4 ports. I'm not sure if there will be any benefits to local switching on the same PFE or not, but even if there are it seems like this will just help fabric redundancy not provide > 30Gbps of forwarding capacity. Of course the biggest problem with the 16x10GE card is that it is SFP+ and can't do WAN PHY, so it will only be useful for simple datacenter SR/LR configurations and not in any carrier roles. -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
