Sean says:
Hi Clarke .. what's the config ? Are you using irb interfaces ?
If no irb, and the PE1 is directly connected to CE1, on interface down
the VPLS primary should switchover.
cheers
Sean
Sean,
Yes, I am using irb interfaces. Since they are not listed under the
"site" stanza, I did not think the irb would make any difference.
Obviously, I was mistaken.
Is there any way to force the failover mechanism to work when configured
for irb? Or is there a workaround to consider?
I am trying to terminate the "L3 side" of the VPLS instance with VRRP
(defined in a VRF instance that include the same irb) on the MX routers
that are configured to support a VPLS multihomed site. Can I still do
this, or does the irb have to be on a separate physical MX router?
Clarke Morledge
College of William and Mary
Information Technology - Network Engineering
Jones Hall (Room 18)
Williamsburg VA 23187
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
