JUNOS uses native IPv4 packets to send BGP messages. IOS uses IPv4 encapsulated in MPLS when LDP without tricks is enabled to send BGP messages.
That are defaults, which can be changed of course. //Krzysztof -----Original Message----- From: Kari Asheim [mailto:[email protected]] Sent: Thursday, 12 November, 2009 14:34 To: Krzysztof Szarkowicz Cc: 'Tima Maryin'; [email protected] Subject: Re: [j-nsp] MX960 JunOS recommendations On Thu, Nov 12, 2009 at 01:45:22PM +0100, Krzysztof Szarkowicz wrote: > > The most common cause of dropping is mismatch of MPLS MTU, or L2 device with > misconfigured MTUs > somewhere in between. Are you sur you mean MPLS MTU? There is only one BGP session between a set of peers, even if you have several address families. I always thought this used a regular L3 protocol like IP (could be exhanged with v6 in the future). Kari _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
