Hi, The version we are using is JunOS 9.2R2.15 I also supposed that Junos do not require any kind of reset, but when I add any new prefixes (ow n by AS or its customers) on policy-statement to block incoming via upstream and commit, it does not take effect. But when I hard reset the peer then only it takes on effect.
Currently we peering with Tier One1 ISP with two location (Multi-homing to the single AS), and got a full BGP table from both side. Thank you Ramesh. On Fri, Nov 13, 2009 at 8:04 PM, Chris Adams <[email protected]> wrote: > Once upon a time, Ramesh Karki <[email protected]> said: > > First, we had to hard reset the bgp peer whenever we change the policies > > (inbound policy) that we had set. By just doing soft reset the router > will > > not take effect of that changed policies until we do hard reset. > > You shouldn't need to do any kind of reset; on JUNOS, policy changes are > applied on commit (although it can take a few seconds to work through a > full BGP table). > > You didn't mention what version of JUNOS you are running (always an > important thing to include when discussing possible bugs). > > -- > Chris Adams <[email protected]> > Systems and Network Administrator - HiWAAY Internet Services > I don't speak for anybody but myself - that's enough trouble. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
