Definitely cool but be aware that there are limitations/issues with some HA features when using logical systems at least on the MX platform. I had to revert to a true JPOC lab to test as the logical systems in my lab were killing my test results.
Sent from my iPhone On Dec 2, 2009, at 3:40 PM, "Stefan Fouant" <[email protected] > wrote: > Use logical-tunnels (lt-x/x/x) to connect logical systems. The > coolest thing is you can even specify the encapsulation, i.e. > Ethernet, PPP, etc. to simulate different types of environments. I > used this almost exclusively for JNCIE preparation with just a > single MX. > > Regards, > > Stefan Fouant > www.shortestpathfirst.net > ------Original Message------ > From: Alfred Schweder > Sender: [email protected] > To: [email protected] > Cc: Alfred Schweder > Subject: [j-nsp] Loop Interface between logical-systems > Sent: Dec 2, 2009 6:05 PM > > Hello > > I'm new in logical-systems, but it looks great. > > I like to collect some old routers (access and distribution layer) in > one system, but I miss one point - Is there a way to configure a > virtual interface to interconnect these logical systems internaly ? > > Or is a cable between two phy. interfaces the only way to do this ? > > Thanks and regards, > > -- > Alf > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > Sent from my Verizon Wireless BlackBerry > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
