as far as i know this feature is not available yet. lsp is only p2p @$IF
On Thu, Dec 3, 2009 at 8:24 PM, Clarke Morledge <[email protected]> wrote: > I am in the process of building a VPLS implementation using LDP to build > the LSPs but using BGP to handle the L2 signaling: > > I know that there is a dynamic way to configure point-to-multipoint (P2MP) > LSPs when using RSVP with the "provider-tunnel" keyword for each VPLS > routing instance , but I don't quite understand how to do this with LDP. I'm > getting a little lost when reading this: > > > http://jnpr.net/techpubs/en_US/junos10.0/information-products/topic-collections/feature-guide/vpls-traffic-flooding-p2mp-lsp-solutions.html > > I see that there is some IETF draft work being done on P2MP for LDP: > > http://tools.ietf.org/html/draft-ietf-mpls-ldp-p2mp-08 > > Does this mean that dynamic P2MP LSPs for LDP with VPLS isn't available > yet, or is there some other workaround? > > I'm having some difficulty trying to wrap my head around this. The > ultimate purpose is to cut down on unnecessary packet replication due to > broadcast, multicast, and unknown unicast within VPLS. I would rather not > use RSVP since it is more complex to configure than LDP, but perhaps LDP > isn't ready for P2MP for primetime? > > > Clarke Morledge > College of William and Mary > Information Technology - Network Engineering > Jones Hall (Room 18) > Williamsburg VA 23187 > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
