Hi,
Hereafter a simple example of static P2PM with 2 branch
Enable mpls and RSVP on your routers.
On the head router :
protocols {
mpls {
label-switched-path R1toR2 {
from x.x.x.x
to y.y.y.y;
p2mp MyP2MP;
primary path1;
}
label-switched-path R1toR3 {
from x.x.x.x
to z.z.z.z;
p2mp MyP2MP;
primary path2;
}
path path1 {
A.B.C.D strict;
}
path path2 {
A.B.C.E strict;
}
}
}
To inject multicast trafic into p2mp
set routing-options static route 232.x.x.x/X p2mp-lsp-next-hop MyP2MP
Regards,
David
David Roy
Orange France - RBCI IP Technical Assistance Center
Tel. +33(0)299876472
Mob. +33(0)685522213
Email. [email protected]
-----Message d'origine-----
De : [email protected]
[mailto:[email protected]] De la part de chandrasekaran iyer
Envoyé : mardi 8 décembre 2009 14:42
À : [email protected]
Objet : [j-nsp] Very urgent: Point to multipoint lsp
Hi,
Anyone can provide me working config. of point to multipoint lsp.
--
Thanks with regards
Shekar.B
--
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
*********************************
This message and any attachments (the "message") are confidential and intended
solely for the addressees.
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration.
France Telecom Group shall not be liable for the message if altered, changed or
falsified.
If you are not the intended addressee of this message, please cancel it
immediately and inform the sender.
********************************
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
