There is nothing to it. We do it all the time for lab testing. Here is a config
snippet from an MX960:
j...@cor01> show configuration protocols rsvp
interface ge-0/0/0.0;
interface ge-0/0/6.0;
interface ge-0/1/6.0;
interface ge-1/0/0.0;
interface fxp0.0 {
disable;
}
interface xe-1/0/0.0;
j...@cor01> show configuration logical-systems COR02 protocols rsvp
interface ge-0/0/1.0;
interface ge-0/1/5.0;
interface ge-0/0/5.0;
interface xe-1/1/0.0;
interface xe-4/2/0.0;
j...@cor01> show configuration logical-systems CBR01 protocols rsvp
interface ge-0/1/0.0;
interface ge-0/1/1.0;
Remember, if you are using the show rsvp session command you need to make sure
you have your corresponding LSPs built as well before you see anything.
Regards,
-Jeff
________________________________________
From: [email protected] [[email protected]]
On Behalf Of chandrasekaran iyer [[email protected]]
Sent: Tuesday, December 08, 2009 10:29 PM
To: [email protected]
Subject: [j-nsp] rsvp using logical systems
Hi,
i am trying to establish RSVP session using logical systems.
My configs doesn't seem to work. Could anyone help me with working configs.
--
Thanks with regards
Shekar.B
--
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
