On Wednesday 16 December 2009 11:39:40 pm Daniel Verlouw wrote: > has anyone ever seen the behaviour below? I've been going > back and forth with JTAC for months now without any > result (which seems to be the norm nowadays...). We just > upgraded a few M-series boxes from 9.3 to 9.5R3 and the > issue still persists. It seems the issue was introduced > in one of the earlier 9.x releases. > > dan...@xxxxx> show route advertising-protocol bgp <ipv6 > neighbor> error: timeout communicating with routing > daemon
We've never seen this issue before. We have about 95% of our M7i/M10i routers running JUNOS 9.3R2.8, all with a full v6 table, no issues. The other 5% are running JUNOS 9.4R1.8 (yuk!), all with a full v6 table, no issues either. Control plane is an RE-850 with 1.5GB of DRAM, if that helps any. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
