I'm having an odd problem routing IPv6 traffic through an MX-960 I'm testing. I'm sending traffic from a directly connected host through the Juniper box to be routed out to the Internet. I can ping the address on the MX from the downstream router, but can't seem to route *through* the Juniper.
One thing that may be pertinent is that the next-hop I expect the traffic should take is on the other end of a 6in4 tunnel. Any ideas? Cheers, jonathan _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
