Sounds like a hardware failure or a counterfeit board if that exists for
Juniper.
-Scott
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joerg Staedele
Sent: Thursday, January 28, 2010 12:41 PM
To: [email protected]
Subject: [j-nsp] Strange Errormessage - jtag0 incorrect pn, 0x2400
Hi colleagues,
i had some strange messages in my log after booting ->
Jan 28 17:05:10 lab-router1 feb CM: Error requesting SBR SET BOOLEAN,
illegal setting 33
Jan 28 17:05:10 lab-router1 feb CM: Error requesting SBR SET BOOLEAN,
illegal setting 33
Jan 28 17:05:26 lab-router1 feb GE(1/0): jtag0 incorrect pn, 0x2400
Jan 28 17:05:26 lab-router1 feb GE(1/0): jtag1 incorrect manufacturer,
0x5561
JunOS 8.5S5 on a M10 with RE-3.0
Any ideas what it means?
Regards,
Joerg
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
