Hello, I've got one M7i (RE-400 & 768MB Ram) running JunOS 9.6R2 and dealing with more than 900,000 prefixes. Memory utilisation is at %92. I've been monitoring it for more than 4 months and I've never had any troubles.
Regards, Vladislav ------Original Message------ From: TCIS List Acct Sender: [email protected] To: NSP Juniper Subject: Re: [j-nsp] Need suggestions.. Sent: 4 Feb 2010 16:26 We have 4 M7i's with RE-400's and 768M RAM and have never had a problem with taking full routes (we are at 55% memory usage right now). With all of the comments on this topic, should we be worried? Our units push ~200Mbit traffic, so they are nowhere near capacity CPU wise. > I can confirm your worry about the RE-850. > > We had one box with a full Internet table (~310K prefixes) *and* a > reasonable number of L3VPNs with a total of ~160K prefixes, *and* a > high number of interfaces. This box needed enough RE memory that we > started seeing swap usage. Not good. > > Now the box has a reduced Internet table, and is happy. > > Steinar Haug, Nethelp consulting, [email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- ----------------------------------------- Mike Bacher / [email protected] TCIS - TulsaConnect Internet Services http://www.tulsaconnect.com ----------------------------------------- _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp Sent using BlackBerry® from Orange _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
