Sorry, that last post was not intended for J-NSP... Please disregard. Stefan Fouant, CISSP, JNCIE-M/T www.shortestpathfirst.net GPG Key ID: 0xB5E3803D
> -----Original Message----- > From: Stefan Fouant [mailto:[email protected]] > Sent: Friday, February 05, 2010 2:15 PM > To: 'Stefan Fouant'; 'Brendan Mannella'; [email protected] > Cc: [email protected] > Subject: RE: [j-nsp] Need suggestions.. > > I wanted to add that if we want to carry Layer 2 all the way up to the > 6509 > and terminate the Layer 3 at the core layer and that core layer is > composed > of 2 6509s for redundancy (see diagram), you are still going to need to > do > VRRP. > > If we move the Layer 3 termination to the Aggregation layer, we don't > need > VRRP so long as you always use 4200s in a Virtual Chassis > configuration. In > this mode, we do VC-LAG (Virtual-Chassis LAG) between the two 4200 VC > Members and the access layer device. So this is probably the best > approach > since we don't have the wiggle room to do VRRP (readdressing, etc.)... > > Stefan Fouant, CISSP, JNCIE-M/T > www.shortestpathfirst.net > GPG Key ID: 0xB5E3803D > > > > -----Original Message----- > > From: Stefan Fouant [mailto:[email protected]] > > Sent: Friday, February 05, 2010 2:04 PM > > To: 'Brendan Mannella'; '[email protected]' > > Cc: '[email protected]' > > Subject: RE: [j-nsp] Need suggestions.. > > > > Yes, you should be able to use third party memory. > > > > Just make sure to swap it out if you end up RMA'ing a box ;) > > > > Stefan Fouant, CISSP, JNCIE-M/T > > www.shortestpathfirst.net > > GPG Key ID: 0xB5E3803D > > > > > -----Original Message----- > > > From: [email protected] [mailto:juniper-nsp- > > > [email protected]] On Behalf Of Brendan Mannella > > > Sent: Friday, February 05, 2010 12:49 PM > > > To: [email protected] > > > Cc: [email protected] > > > Subject: Re: [j-nsp] Need suggestions.. > > > > > > Is there a third party alternitive? > > > > > > Brendan Mannella, CEO > > > TeraSwitch Networks Inc. > > > Office: 412.224.4333 x303 > > > Mobile: 412.592.7848 > > > Efax: 412.202.7094 > > > > > > On Feb 5, 2010, at 12:47 PM, [email protected] wrote: > > > > > > >> Yes, if I am in "memory upgrade mode", I might as well upgrade > the > > > >> CFEB as well. > > > >> So, if anyone has the PN#, I would appreciate knowing it also. > > > > > > > > MEM-FEB-256-S > > > > Optional M10i,M7i Forwarding Engine Board (FEB) Memory Upgrade: > > 256 > > > > MB DRAM Module > > > > > > > > Steinar Haug, Nethelp consulting, [email protected] > > > _______________________________________________ > > > juniper-nsp mailing list [email protected] > > > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
