Hello Alex, I changed config and it works.
Thank you for your help! John On Wed, Feb 10, 2010 at 11:05 AM, Alexander Tarkhov <[email protected]>wrote: > Hello John! > > On Juniper side this can be added to your logical unit configuration: > > unit 614 { > encapsulation vlan-ccc; > vlan-id 614; > input-vlan-map { > swap; > vlan-id 461; # swap dot1.q tag before sending over network > } > output-vlan-map swap; # swaps to 614 before sending to local CE > } > > Then check the output of show l2circuit connections summary > It will give you a hint on any mismatch that can prevent the > connection from being Up. > > Regards, > Alex > > > On Wed, Feb 10, 2010 at 11:03 AM, Ioan Branet <[email protected]> > wrote: > > Hello group, > > > > > > > > I am traying to configrure a L2circuit between an MX and a 7600 as PEs > > (ethernet-vlan mode). > > > > The problem is that the ping between CE1 and CE2 works only when I use > the > > same vlan-ids on both PEs. > > > > If I use different vlans ID , on Juniper side CE wont learn ARP . > > > > [...snip....] > > > Any hint? > > > > Thank you, > > John > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
