On Thu, Feb 11, 2010 at 09:18:48PM +0300, Cyrill Malevanov wrote:
> 9.5R3
>
> ethernet-switching-options {
> analyzer sorm {
> output {
> interface {
> ge-2/0/7.0;
> }
> }
> }
> }
>
> it works
You configured local span-port, and this works for me too.
In my case, i'm trying to configure remote span, with output set to vlan:
s...@us-smf-csw02> show configuration ethernet-switching-options analyzer
Analyzer2
loss-priority high;
input {
ingress {
interface ge-0/0/12.0;
interface ge-0/0/13.0;
interface ge-0/0/14.0;
interface ge-0/0/16.0;
interface ge-0/0/17.0;
interface ge-0/0/19.0;
}
}
output {
vlan {
Analyzer2;
}
}
And it seems that my problem may be related to the fact that
this vlan exits this switch and enters next one via aggregated
ethernet:
s...@us-smf-csw02> show vlans Analyzer2 extensive
VLAN: Analyzer2, Created at: Fri Feb 12 02:46:45 2010
802.1Q Tag: 999, Internal index: 18, Admin State: Enabled, Origin: Static
Protocol: Port Mode
Number of interfaces: Tagged 1 (Active = 1), Untagged 0 (Active = 0)
ae2.0*, tagged, trunk
Will check next week.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
