This looks a lot like the setup I am builing. I think you convinced me to go with the J2320.
What version of the OS are you running? Any problems with ipv6 on the router? /Morten On Thu, Feb 18, 2010 at 3:53 PM, Niels Raijer <[email protected]> wrote: > Op 18 feb 2010, om 10:52 heeft Morten Isaksen het volgende geschreven: > >> As far as I am told it is 2 Gig now. Juniper has just not updated the >> spec on the web. > > Correct, a J2320 can have 2 GB of RAM: > > ni...@nikhef-1> show chassis routing-engine > Routing Engine status: > Temperature 39 degrees C / 102 degrees F > CPU temperature 40 degrees C / 104 degrees F > DRAM 2048 MB > Memory utilization 52 percent > CPU utilization: > User 0 percent > Real-time threads 21 percent > Kernel 2 percent > Idle 77 percent > Model RE-J2320-2000 > > Other than that, this router (along with another J2320 router with 2 GB RAM, > and soon to be three more) holds just over a million routes just fine: > > Table Tot Paths Act Paths Suppressed History Damp State > Pending > inet.0 995511 308800 0 0 0 > 0 > inet6.0 10670 2594 0 0 0 > 0 > > It has three and a half full IPv4 tables and three full IPv6 tables, and more > than enough memory to spare as you can see above. > > We normally run about 60 Mbps of IMIX through this box but we have seen times > where it exceeded 100 Mbps without any sweat at all. > -- > Niels Raijer > [email protected] > http://fusix.nl > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Morten Isaksen _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
