Hello , Thanks for your response. But is this valid also for a logical sub-interface ? does this mean that the bandwidth percentage defined in a scheduler will be calculated based on the bandwidth defined in the shaping rate ?
thank you. > Subject: Re: [j-nsp] congestioning a logical sub-interface > From: [email protected] > Date: Mon, 22 Feb 2010 21:40:00 +1100 > CC: [email protected] > To: [email protected] > > Scheduling on an interface with a shaping rate that is less than the physical > line rate artificially creates congestion when an offered traffic load is > greater than the shaping rate. ie. If you have a 5Mbps scheduler and you > offer 5.01Mbps you will see queuing... > > > On 22/02/2010, at 8:51 AM, meryem Z wrote: > > > > > Hello community, > > > > i need to verify Cos scheduler on my logical interface. to do this i need > > to simulate Congestion conditions. > > The question is : how to congestion a logical sub-interface without > > impacting the physical interface. is it possible to set a bandwidth limit > > for the sub-interface? > > > > > > thank you. > > > > Regards. > > > > > > _________________________________________________________________ > > Hotmail : une messagerie fiable avec la protection anti-spam performante de > > Microsoft > > https://signup.live.com/signup.aspx?id=60969 > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _________________________________________________________________ Hotmail : une messagerie fiable avec la protection anti-spam performante de Microsoft https://signup.live.com/signup.aspx?id=60969 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
