Hi. I was considering Juniper EX-4200 with AFL to an IPv4+IPv6 BGP scenario where the number of FIB routes is enough, but this part of the specs(http://www.juniper.net/us/en/local/pdf/datasheets/1000215-en.pdf) is worrying me:
Layer 3 Features: IPv4 • Max number of ARP entries: 16,000 • Max number of IPv4 unicast routes in hardware: 10,000 • Max number of IPv4 multicast routes in hardware: 2,000 • Routing protocols: RIPv1/v2, OSPF, BGP, IS-IS • Static routing • Routing policy • Bidirectional Forwarding Detection • Layer 3 redundancy: VRRP Layer 3 Features: IPv6 • Max number of Neighbor Discovery (ND) entries: 16,000 (shared with IPv4) • Max number of IPv6 unicast routes in hardware: 1,000 • Routing protocols: RIPng, OSPFv3 • Static routing Would that mean that there is no BGP IPv6 support ? Wouldn't that contradict with the supported RFCs section ? RFC 2283 Multiprotocol Extensions for BGP-4 RFC 2545 Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing I can especulate that there is no support for IPv6 BGP neighbors but there is support for IPv6 address-family in IPv4 BGP sessions, is that so ? (As for JunOS version goes, it seems it would run 9.5R4 for starters) Rubens _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
