Hi, You can view drops at the fabric level via the command : show class-of-service fabric statistics
David David Roy Orange France - RBCI IP Technical Assistance Center Tel. +33(0)299876472 Mob. +33(0)685522213 Email. [email protected] -----Message d'origine----- De : [email protected] [mailto:[email protected]] De la part de meryem Z Envoyé : mercredi 10 mars 2010 13:17 Cc : [email protected] Objet : [j-nsp] Verify loss priority for a forwarding class hello Community, I configured a forwarding class with high priority loss. Now I need to verify that the traffic sent under this forwarding class ( using a traffic generator) has a high priority loss. The "show interface queue " doesn't show this information. is there any other way to do it ? Thank you. _________________________________________________________________ Votre messagerie et bien plus où que vous soyez. Passez à Windows Live Hotmail, c'est gratuit ! https://signup.live.com/signup.aspx?id=60969 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp ********************************* This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ******************************** _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
