Beware of the firewall nature of the SRX in situations like asymmetrical routing; you can make a workaround using selective firewall filters with the packet-mode clause, as long as you don't put traffic where the router is the destination in packet mode (this has to use flow mode).
Rubens On Mon, Mar 22, 2010 at 5:11 PM, Jay Hanke <[email protected]> wrote: > I’m in need of a box that will handle up to ½ gig of throughput and some > very low volume BGP (about 200 routes + default) for IPv4 and IPv6 in the > next couple of months. > > > > I was looking at the sheets and the SRX appears to give a little more “bang > for buck” as compared to a j2320 or j2350. I wouldn’t be afraid of the EX > line but the cost of the AFL for BGP puts me out of the budget for the > project. > > > > Has anyone used an SRX in a similar situation? Is the j-series still safer? > > > > Thanks, > > > > Jay > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
