hello, I am still waiting the response ..is there anyone have faced the same problem ??
Thank you, On Wed, Mar 31, 2010 at 1:51 PM, Ramesh Karki <[email protected]> wrote: > Hi, > > here is my config : > > sh conf int ge-0/0/0 > description " "; > unit 0 { > family inet { > address x.x.193.65/26; > } > family inet6 { > address abcd:3800:1:1::1/64; > } > } > > sh conf int lo0 > unit 0 { > family inet { > } > address x.x.192.1/32; > } > family inet6 { > address abcd:3800::1/128; > } > } > > rib inet6.0 { > static { > route abcd:3800::2/128 next-hop abcd:3800:1:1::2; > route abcd:3800::4/128 next-hop abcd:3800:2:1::2; > > here, abcd:3800:1:1::2 is neighbor (P2P) ip of 72xx router and > abcd:3800::2/128 is lo0 ip. > > The command > show route table inet6.0 only shows the direct and connected > route. > > thank you, > > > On Wed, Mar 31, 2010 at 1:36 PM, Mark Tinka <[email protected]>wrote: > >> On Wednesday 31 March 2010 03:20:28 pm Ramesh Karki wrote: >> >> > Static route from Cisco to M10i Lo0 ip is okay. but >> > static route from M10i to 720x Lo0 is not showing on >> > routing table and it is not working. There is no problem >> > between p2p connection. >> >> Can we take a quick peek at your static routing >> configuration? >> >> Cheers, >> >> Mark. >> > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
