Hello,
I am running 4 x EX4200 in a virtual chassis configuration. I configured
sFlow but I can not get it to work.
Basically the configuration is accepted and no errors are given but no
flows are sent to the collector.
I tried placing the collecting within the same subnet as the vme 0
management interface and also moving it to a physical port.
According the EX4200 the flows are being sent but I am running a tcpdump
on the collector and nothing is coming from the EX4200.
aalejan...@mop-ex4200> show sflow collector
Collector Udp-port No. of samples
address
10.255.253.10 9998 25067
{master:0}
aalejan...@mop-ex4200>
I am running JunOS 10.0S1.1.
Regards,
Abel.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
