can you show us your ospf and ospf3 configuration? Also, have you specified router-id under routing-options?
Thanks, Nilesh -----Original Message----- From: "Ramesh Karki" <[email protected]> Subj: Re: [j-nsp] ipv6 routing Date: Sat Apr 3, 2010 10:52 pm Size: 1K To: "[email protected]" <[email protected]> cc: "Antonio Querubin" <[email protected]>; "[email protected]" <[email protected]> Hi Mark, As I have already mentioned, the same interface fe-0/1/0 has been configured to run both ospf and ospf3 and there is no any issue on ospf v4 from the beginning. > show ospf interface fe-0/1/0.0 Interface State Area DR ID BDR ID Nbrs fe-0/1/0.0 BDR 0.0.0.10 x.x.192.4 x.x.192.1 1 but the same interface configured for ospf3 outcome is unexpected. > show ospf3 interface fe-0/1/0.0 OSPF instance is not running Thank you, Ramesh On Sat, Apr 3, 2010 at 9:25 AM, Mark Tinka <[email protected]> wrote: > On Friday 02 April 2010 04:17:15 am Antonio Querubin wrote: > > > show ospf interface fe-0/1/0.something > > > > show ospf3 interface fe-0/1/0.something > > Ramesh, did you get a chance to run the commands above as > requested by Antonio? > > I'm curious to see what's going on here, especially since, > for all intents and purposes, your configuration looks > alright. > > Cheers, > > Mark. > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
