Hey Guys,
We just tired installing a MPC-3D-16XGE-SFPP on a MX960 running
10.0R2.10 on slot 0 and got a error "FPC 0 misconfigured". After this
message, any attempt to "online" the FPC just fails with the same
message again. The output of "show chassis fpc" shows the following;
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Offline ---FPC misconfiguration---
1 Online 28 12 0 1024 23 33
Anyone else encounter this problem before? This is occurring on 2
separate cards on different routers, so I don't think the cards are
faulty.
Any help would be greatly appreciated!
Thanks,
Michael
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
