Hello,
I've just executed this comand on the shell and it appeared a lot of routes:
r...@eg01% rtsockmon -t rpd
sender flag type op
[17:30:29] rpd P route add inet6 2401:ee00:: tid=2
plen=32 type=user flags=0x10 nh=indr nhflags=0x4 nhidx=262144 filtidx=0
[17:30:29] rpd P route add inet6
2401:ee00:1c1c::2001:668 tid=0 plen=32 type=user flags=0x0 nh=ucst
nhflags=0x1 nhidx=591 filtidx=0
[17:30:29] rpd P route change inet6
2401:ee00:1c1c::2001:668 tid=2 plen=32 type=user flags=0x10 nh=indr
nhflags=0x4 nhidx=262151 filtidx=0
[17:30:29] rpd P route add inet6
2400:6800:1c1c::2001:668 tid=0 plen=32 type=user flags=0x0 nh=ucst
nhflags=0x1 nhidx=591 filtidx=0
[17:30:29] rpd P route add inet6
2400:6800:1c1c::2001:668 tid=2 plen=32 type=user flags=0x10 nh=indr
nhflags=0x4 nhidx=262151 filtidx=0
[17:30:29] rpd P route add inet6 2404:8000:f:0:1c1c::
tid=0 plen=48 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=591 filtidx=0
[17:30:29] rpd P route add inet6 2404:8000:5:0:1c1c::
tid=0 plen=48 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=591 filtidx=0
[17:30:29] rpd P route add inet6 2404:8000:c:0:1c1c::
tid=0 plen=48 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=591 filtidx=0
[...]
[17:30:31] rpd P route change inet 195.140.208.0 tid=0
plen=22 type=user flags=0x0 nh=indr nhflags=0x4 nhidx=262147 filtidx=0
[17:30:31] rpd P route change inet 85.197.112.0 tid=0
plen=20 type=user flags=0x0 nh=indr nhflags=0x4 nhidx=262147 filtidx=0
[17:30:31] rpd P route change inet 195.225.208.0 tid=0
plen=22 type=user flags=0x0 nh=indr nhflags=0x4 nhidx=262147 filtidx=0
[17:30:31] rpd P route change inet 195.158.54.0 tid=0
plen=24 type=user flags=0x0 nh=indr nhflags=0x4 nhidx=262147 filtidx=0
[17:30:31] rpd P route change inet 195.158.54.0 tid=2
plen=24 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=573 filtidx=0
[17:30:31] rpd P route change inet 85.197.112.0 tid=2
plen=20 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=573 filtidx=0
[17:30:31] rpd P route change inet 195.140.208.0 tid=2
plen=22 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=573 filtidx=0
[17:30:31] rpd P route change inet 195.225.208.0 tid=2
plen=22 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=573 filtidx=0
[17:30:31] rpd P route change inet 148.247.205.0 tid=2
plen=24 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=583 filtidx=0
[17:30:31] rpd P route change inet 148.247.22.0 tid=2
plen=24 type=user flags=0x0 nh=ucst nhflags=0x1 nhidx=583 filtidx=0
[..]
The output is very long ( I had to stopped after 3 minutes) and we don't
know if that is normal o no. What should we do? Is it possible to clean
this routes?
Thanks a lot for your help,
Matthew
El 04/05/2010 15:14, Ihsan Junaidi Ibrahim escribió:
you can check for persistent routing updates i.e. flaps by running
rtsockmon -t rpd on the shell.
On 4 May 2010 22:04, Juniper <[email protected]
<mailto:[email protected]>> wrote:
Hello there,
This message has appeared in the log of our M20. It is not the
first time it occurs and we are quite worried. The average CPU
consumption is 4% and just at the time the message appeared on the
log, we found increases up to 100% and an increase in temperature
of 6 º in the routing-engine 0. This router works with two logical
routers and receive full-routing of three different providers. We
also have configured and IS-IS and IBGP sessions.
May 4 11:43:03 xxx01.yyy2.abc-d.net <http://xxx01.yyy2.abc-d.net>
LEV[2625]: RPD_SCHED_SLIP: 7 sec scheduler slip, user: 3 sec
306043 usec, system: 0 sec, 5732 usec
We do not know what could be the problem because we have not
detected any event bgp, routing update, addition of new machines, etc.
Do you have any idea what may be the reason for this high cpu usage?
Thanks in advance,
Matthew
_______________________________________________
juniper-nsp mailing list [email protected]
<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Thank you for your time,
Ihsan Junaidi Ibrahim
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
