Please be aware that if you are using multiple parallel links, in some corner cases, you will create a RSVP error loop messages as seen in our network and documented in PR 485509. Fortunately, there is already a enhancement for this problem in junos 8.5S6.
I would suggest using link aggregation if you have the same fiber cable and transmission across all those links to avoid jitter and latency. You can use LACP for fast detection of member link failure and AFAIK, it will change the RSVP interface bandwidth. You can then use autobandwidth if you wish to have dynamically change the LSP to other links should the bandwidth of the link aggregation is not enough. Cheers, Benny _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
