Hi Wala You can setup virtual lab with gns3/dynamips simulation software. And you can use Juniper and Cisco ios for testing environment, and you can connect ip topology with VMware virtual machines and start multicast streaming with vlc 0.8.6 version
Or if you have a real lab , you can just use vlc 0.8.6 version. you will start streaming with vlc stream wizard --> "rtp multicast" and you will get the stream with network-->udp/rtp multicast (multicast address) if you have any problem, feel free to send email On Sat, May 8, 2010 at 12:37 AM, Tomasz Opala <[email protected]> wrote: > Hi Walaa, > > try VideoLAN - free streaming application. > > Regards, > Tomasz > > On Fri, May 7, 2010 at 9:05 PM, Walaa Abdel razzak <[email protected] > >wrote: > > > Hi Experts > > > > Is it possible to generate multicast streaming (simulation) from my > router > > to verify multicast configuration? If no, is their any other easy way? > > > > Best Regards, > > Walaa Abdel Razzak > > > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
