set chassis cluster redundancy-group # ip-monitoring As with all things, YMMV.
On Wed, May 26, 2010 at 7:40 AM, Tim Eberhard <[email protected]> wrote: > You could always run trackip on the SRX to monitor the path to the switch. > Pinging a L3 interface on the core switch itself. > > Hope this helps > > -Tim Eberhard > > > On May 26, 2010, at 6:27 AM, Fahad Khan <[email protected]> wrote: > > Dear Folks, >> >> I am just shocked to know that IDP8200 does not support Peer Port >> Modulation >> for 10 gig links. >> >> Does any one know, how can I failover my Firewall properly if the link >> between Core Switch and IDP is down >> >> the diagram is >> >> SRX3600---HA-------SRX3600 >> | | >> IDP8200 IDP8200 >> | | >> ------Core -----Switch------ >> >> >> Awaiting for quick response >> >> Muhammad Fahad Khan >> JNCIP - M/T # 834 >> IT Specialist >> Global Technology Services, IBM >> [email protected] >> +92-321-2370510 >> +92-301-8247638 >> Skype: fahad-ibm >> http://www.linkedin.com/in/muhammadfahadkhan >> http://fahad-internetworker.blogspot.com >> http://www.visualcv.com/g46ptnd >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
