On Wed, May 26, 2010 at 11:55 AM, Menno Kortekaas <[email protected]>wrote:
> Maybe this is because ipv6 works in packet mode, but not really on a vlan > interface... > I've also placed an IPv6 address on my vlan interface and it is reachable > through a family inet interface, but not through a family ethernet-switching > interface. > > I think because something is not really really working, Juniper just hides > the command. > I've found another "hidden feature" today (JUNOS 10.0R3.10). > > > # set interfaces ge-0/0/15 gigether-options ? > Possible completions: > > 802.3ad IEEE 802.3ad > + apply-groups Groups from which to inherit configuration data > + apply-groups-except Don't inherit configuration data from these groups > > auto-negotiation Enable auto-negotiation > ignore-l3-incompletes Ignore L3 incomplete errors > loopback Enable loopback > > mpls MPLS options > no-auto-negotiation Disable auto-negotiation > no-loopback Don't enable loopback > > redundant-parent Parent of this interface > > # set interfaces ge-0/0/15 gigether-options no-flow-control > > # commit check > configuration check succeeds > > > There should be IPv6 support in flow mode in JUNOS 10.2 but what I've > heared is that 10.2 will not be released for the branch series. > > Menno > > > Where did you hear about 10.2 not being available to branch series? Any idea when 10.2 is to arrive? - Johan _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
