Thanks this would be the only option? Best regard, Gabriel Farias
2010/5/28 Mohan Nanduri <[email protected]> > you can configure bgp session between the logical systems, as they are like > a true separate router. > > On Fri, May 28, 2010 at 3:27 PM, Gabriel Farias <[email protected] > > wrote: > >> Hello Gentlemen, >> >> >> I have a chassis M10i (Junos 9.6R1.13) with three-logical systems (LS1, >> LS2 >> and LS3) configured and running, need to copy the routing tables of the >> LS1 >> and LS2 to LS3, I have some questions: >> >> >> >> 1) Can I copy this? >> >> 2) How best to do if possible? >> >> >> Done in consultation with J-net and also in part of Juniper support site >> and >> found much documentation, but nothing talking about this specific issue. >> >> Thanks, >> Gabriel Farias >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
