Hello, You will create a new MIP on the DMZ interface using an IP in the DMZ address space.
If traffic is destined for the Untrust zone, the server will use the Untrust MIP. If it routes to the DMZ, it will use the DMZ MIP. Our old mail system used this design for OWA (Untrust) and SMTP relay (DMZ) with the same server in the Trust zone. Cheers! -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kamal Dissanayaka Sent: Monday, June 07, 2010 7:51 AM To: [email protected] Subject: [j-nsp] Can we use MIP for outgoing traffic on a different interface Hi, I have a MIP (z.z.z.z) configured on a interface X.X on zone Untrust for server y.y.y.y on zone Trust. config is as bellow set interface "ethernet x.x" mip z.z.z.z host "y.y.y.y" netmask 255.255.255.255 vr "trust-vr" set policy id 102 from "Untrust" to "Trust" "Any" "MIP(z.z.z.z)" "ICMP-ANY" permit log set policy id 103 from "Trust" to "Untrust" "y.y.y.y" "Any" "ICMP-ANY" permit log The outgoing traffic from zone trust to untrust works fine and source address is translated to MIP (z.z.z.z). Now I need to use same MIP (z.z.z.z) for outgoing traffic from zone Trust server y.y.y.y to another zone (DMZ). Is this possible? if it is possible could you please send me a sample config? Thanks Kamal _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
