Hi Forum, I have been trying to get the JNCIP LAB (www.juniper.net/training/certification/JNCIP_studyguide.pdf) up and running on my MacBook Pro running Snow Leopard 10.6.3. I've manage to get it working with qemu using UNIX sockets and UDP tunnels, but only 2 Juniper routers (R1 & R2) could network with each other.
After 5 months of back and forth I eventually got GNS3 running for Juniper under Snow Leopard 10.6.3. I manage to get the JNCIP LAB setup and start all routers just as with qemu, but still experience the same networking issues. I can only ping between R1 and R2. I see the arp entry on R1 and R2 for R3 but can not ping to R3 from R1 or R2. On R3, I can ping the local address of the interface connecting to R1 and R2, but cannot ping to R1 or R2 from R3. I disabled my MAC Firewall, but still no luck. My LAB Topology is based on the Official JNCIP Study Guide from Juniper. www.juniper.net/training/certification/JNCIP_studyguide.pdf Any help/guidance will really be appreciated. Thank you in advance Kind Regards Deon Vermeulen Fax2Email: 088628731 email: [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
