-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi,
the disabling of the hard drive did not change the behaviour, so I would like trying to disable adaptive standby - but I can't find it anywhere in the manual... Is this a hidden knob somebody could point me to? Thanks Tom Am 30.06.2010 12:57, schrieb Thomas Eichhorn: > If you could give me a hint where to find it I would be really glad! > > Tom > > Am 30.06.2010 12:43, schrieb Jared Mauch: >> Have you disabled adaptive standby? I can look up the configuration in a few >> if you don't have it. >> >> Sent from my iThing >> >> On Jun 30, 2010, at 5:46 AM, Thomas Eichhorn <[email protected]> wrote: >> >>> Thanks for all your help, >>> I cannot simply remove the disk nor the cf card, >>> the box is to far away. >>> >>> I now tried to remove the disk from the boot list, >>> so it does not get initialized and the box completely runs >>> from CF - If that doesn't work I will try the other way (disabling >>> cf and enabling disk). >>> >>> If this works I will give feedback here so that people also >>> running into that problem will find it. >>> >>> Tom >>> >>> Am 30.06.2010 10:51, schrieb Marcin Kucharczyk: >>>> On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote: >>>>> Hi Marcin, >>>>> >>>>> we have the same problems with M7Is in the may: >>>>> *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in >>>>> valid: state="ARMED"* >>>>> >>>>> And all of this problems come after installing (we never did not use >>>>> internal CF in its before) Compact Flash 1GB (not from official Juniper >>>>> upgrade kit), its also rebooted every 3-4 hours with the same PANIC >>>>> message. >>>>> >>>>> After removing CFs we do not have this problems. So I think that it was >>>>> not >>>>> problems with internal disks... >>>>> >>>> >>>> Hi, >>>> >>>> our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote >>>> to >>>> Thomas we had removed HDD, and now router runs on CF only. Our CF isn't >>>> from >>>> official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1. >>>> >>>> It's a pity that CF and HDD can't run together. >>>> >>>> Regards, >>>> Marcin >>>> >>>>> >>>>> >>>>> 2010/6/22 Marcin Kucharczyk <[email protected]> >>>>> >>>>>> Hello, >>>>>> >>>>>> tonight one of ours M7i crashed with strange log entry: >>>>>> >>>>>> savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed >>>>>> but >>>>>> state is invalid: state="ARMED" >>>>>> >>>>>> Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash >>>>>> card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do >>>>>> you have any idea what could happened? >>>>>> >>>>>> Regards, >>>>>> Marcin Kucharczyk >>>> _______________________________________________ >>>> juniper-nsp mailing list [email protected] >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >>> _______________________________________________ >>> juniper-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkwsPNwACgkQrUvjMoak8Zd5cgCdHwUD5c8kvjCZ/vt8giRjZoSW Lm4AnR5mvVIHS7pMbKvclh/r4TFrOMIo =Y3kW -----END PGP SIGNATURE----- _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
