the default-lsa is not generated because of Junos 'active backbone detection'
http://www.juniper.net/techpubs/software/junos/junos94/swconfig-routing/configuring-the-backbone-area-and-other-areas.html "Active backbone detection is implemented to verify that area border routers are connected to the backbone. If the connection to the backbone area is lost, then the router’s default metric is not advertised, effectively rerouting traffic through another area border router with a valid connection to the backbone." I don't know if and how it can be disabled..... On Tue, 2010-07-27 at 12:31 +1000, Julien Goodwin wrote: > I've been having some weirdness with OSPF default-lsa's, in that when a > hosts only other area 0 OSPF peer goes away the default drops, despite > the fact that the host has full routes via BGP. > > Is there any way to say that I *always* want a default-lsa sent, no > matter what my OSPF adjacencies may be? > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
