Unfortunately we access these devices over the MLPPP bundle. So the
bundle needs to be up for us to issue that command or the upgrade /
reboot command.
Is there a way to make this part of a one-time start up script though?
Like something Junos could automatically do with the config after the
update has been applied and the box rebooted?
On Jul 30, 2010, at 10:19 AM, Jonathan Looney wrote:
In configuration mode, type 'replace pattern ls- with lsq-'. That
should replace any occurence of ls- with lsq-. You should probably
also run "show | compare" afterward to ensure that this made the
expected changes.
-Jon
On Fri, Jul 30, 2010 at 10:48 AM, Brad Fleming <[email protected]>
wrote:
When upgrading JunosES software from 9.6 to 10.0R3 the ls-0/0/#
interface needs to be changed to lsq-0/0/#. This needs to happen on
the actual interface on any physical interfaces in the bundle. Does
anyone know of a graceful way to perform this task? Does anyone know
why Juniper decided to change the name of the interface (certainly
makes no sense to me)?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
