You mean although you were using recommended Junos but u had the same issue and you upgraded to latest junos?
Can you tell me which Junos version are u using currently?? awaiting for urgent response. regards, Muhammad Fahad Khan JNCIP - M/T # 834 IT Specialist Global Technology Services, IBM [email protected] +92-301-8247638 Skype: fahad-ibm http://pk.linkedin.com/in/muhammadfahadkhan On Mon, Aug 2, 2010 at 6:26 PM, Amos Rosenboim <[email protected]> wrote: > We had a the exact same thing on the lower end SRX (240 if I remember > correctly). > This was resolved by a software upgrade to the latest SRX image at the > time. > > Amos > > On Aug 2, 2010, at 2:48 PM, Fahad Khan wrote: > > > Hi folks, > > > > I am seeing very strange issue on SRX3600 when the traffic is flown > through > > an IPSEC VPN tunnel (established with ISG2000), the tunnel gets up and > the > > traffic flows properly, but suddenly traffic drops, while the tunnel > remains > > up. > > > > And it continues to flow after 15 to 20 time out but again it starts > > droping. I am sure that there is no issue at physical layer. > > > > Has any body faced it yet?? > > > > Please reply ASAP. > > > > Thanks in adv > > > > regards > > Muhammad Fahad Khan > > JNCIP - M/T # 834 > > IT Specialist > > Global Technology Services, IBM > > [email protected] > > +92-301-8247638 > > Skype: fahad-ibm > > http://pk.linkedin.com/in/muhammadfahadkhan > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
