Hi again,
hate to answer myself, but a better search found good answers. A blog entry with examples: http://adisubrata.wordpress.com/2007/11/18/vpls-ldp-configuration/ And JunOS 8.4 configuration from Juniper's website: http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-vpns/id-vpls-ldp-signal.html Thanks for all who answered! Kind regards, Felipe On Fri, Aug 6, 2010 at 6:34 PM, Felipe Zanchet Grazziotin < [email protected]> wrote: > Hello, > > I've been trying to setup multi-vendor (H-)VPLS, but unfortunately it can > only be done over LDP. > > I'm aware of all problems of scalability, and so on, about VPLS when done > over LDP, but the other vendor just cannot do it over BGP now. > > All Juniper I've found documentation about this subject talks about BGP > configuration, am I missing anything? > > My Juniper-side here is a M7i router, should be able to do this job. > > Thanks in advance, > Felipe > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
