Can you please share the configs and steps did you follow using NCP?? regards, Muhammad Fahad Khan JNCIP - M/T # 834 IT Specialist Global Technology Services, IBM [email protected] +92-301-8247638 Skype: fahad-ibm http://pk.linkedin.com/in/muhammadfahadkhan
On Thu, Aug 5, 2010 at 6:25 AM, Rob Cameron <[email protected]> wrote: > That is correct. However NetScreen Remote can work. There are several > alternative solutions out there. We have tested the NCP client and Shewnet. > Both work well with the SRX. We tend to focus on NCP as the preferred client > as its an official product with support mechanisms. > > Rob Cameron > Technical Marketing Engineer - HSS > http://easylink.juniper.net/fwidpwiki > SLT-HSS-TME - Team Alias > (408) 905-9651 > [email protected] > www.juniper.net > > > > > On Aug 4, 2010, at 8:45 AM, Fahad Khan wrote: > > Dear Folks, > > Neither Netscreen Remote Client nor Junos Pulse is supported on SRX 3600 > > Please correct me if I am wrong > > thanks in adv > > regards, > > Muhammad Fahad Khan > JNCIP - M/T # 834 > IT Specialist > Global Technology Services, IBM > [email protected] > +92-301-8247638 > Skype: fahad-ibm > http://pk.linkedin.com/in/muhammadfahadkhan > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
