Yes - I've been told this is due in 10.4 Not sure of your application, but you can still place your st0 interface inside a routing-instance, but the outgoing-interface specified in the IPSEC GW configuration must be present in inet.0
On 10/08/2010, at 12:02 AM, Walter Keen wrote: > When i was evaluating an SRX earlier, I was told this was on the roadmap, > with a date of 'before the end of the year'. Not sure if it's the same > timeline for your application. > > > -----Original Message----- > From: [email protected] on behalf of Alexander Shikoff > Sent: Mon 8/9/2010 5:53 AM > To: juniper-nsp > Subject: [j-nsp] IKE gateway within routing-instance > > Hello, > > Does anyone know are there new JunOS versions for J-series that have support > for > IKE gateway within routing-instance? Thanks. > > -- > MINO-RIPE > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
