RAS, 10.0R2 I opened a case and we will see what happens. I have zero issue with moving to new code if it will solve the issue. This router doesn't do a whole lot (and even less without correct flow reporting)
Thanks, Jim -----Original Message----- From: Richard A Steenbergen [mailto:[email protected]] Sent: Tuesday, August 10, 2010 4:04 PM To: Jim Devane Cc: [email protected] Subject: Re: [j-nsp] MS-DPC export flows have 0 as dest interface On Tue, Aug 10, 2010 at 01:01:48PM -0700, Jim Devane wrote: > > However, The Juniper is not reporting the dest interface and instead > putting in a zero. This is confusing our flow collector (Peakflow SP) > Arbor takes the dest intf and source interface both being zero as a > drop. The traffic is not in fact being dropped, however. > > Has anyone dealt with this particular or type of problem? I was trying What code are you running? We had a similar issue a while back, infact we had a case open on it for over a year before it finally got fixed, but I'm pretty sure our version of the issue has been fixed for a couple years now. -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
