> -----Original Message----- > From: [email protected] [mailto:juniper-nsp- > [email protected]] On Behalf Of Andy M. > Sent: Thursday, August 19, 2010 9:26 AM > To: [email protected] > Subject: Re: [j-nsp] Flow accounting on an M7i > > Thanks for all the input. In the end, I decided to let it sit for an > hour or so and the flows started working. I'm not sure if this is > normal, but not what I expected. The flow errors cleared and there > are no memory issues now.
BTW, for future reference, you don't necessarily need to disable and reenable the Services PIC to stop and restart sampling. You can actually do this with the CLI command 'restart sampling' which simply restarts the 'sampled' daemon. As I've seen similar problems to the ones you're having, I've had success by simply stopping and restarting the process whenever I've run into issues... Glad to hear it's working as expected now... Stefan Fouant, CISSP, JNCIEx2 www.shortestpathfirst.net GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
