As far as I know, you can not do any COS on st0 interfaces yet, and I haven't seen a timeframe for when. I've seen mention of using Virtual Channels for this (whatever those are), but I THINK that might be J-series only, and i've never seen a working config of it -- only references on slide decks about the limitation of no COS on st0.
Will > Date: Mon, 23 Aug 2010 14:24:15 +0500 > From: Fahad Khan <[email protected]> > To: [email protected] > Subject: [j-nsp] COS on st0 interface > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi Folks, > > I need to implement COS on tunnel interface on SRX3600 device . Bandwidth > limit is done by policer called in filter (one options). A filter cannot be > applied on st0 interface. > > any solution?? or work arround? > > regards, > > Muhammad Fahad Khan > JNCIP - M/T # 834 > IT Specialist > Global Technology Services, IBM > [email protected] > +92-301-8247638 > Skype: fahad-ibm > http://pk.linkedin.com/in/muhammadfahadkhan > > > ------------------------------ > > _______________________________________________ > juniper-nsp mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > End of juniper-nsp Digest, Vol 93, Issue 35 > ******************************************* _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
