Hopefully someone can answer this.. I come from Cisco shop primarily and am comparing behaviors among Cisco and Juniper..
My question is thus.. I have multicast setup with Juniper and it is working, however I am having trouble verifying state when there is no subscribers to the group.. Basically my scenario is that I have a sender generating multicast traffic, but no receiver. On Cisco, the RP maintains a *,G and S,G state for the group entries even when they are pruned. What I'm finding with Juniper devices is when the Juniper device is an RP is that when it Prunes it it totally removes any state of the multicast entry. As it removes any state I have no way of troubleshooting anything. Commands such as 'show pim join' and 'show multicast route' show nothing. The Juniper device is not the first hop device in my topology.. My topology: Sender > L3 switch > Juniper Router (also RP) > Juniper Router > L3 switch > receiver. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
