I have a M7i router that does not report its PIM neighbors - Redback
SE1200 and Cisco 7600. I can see the M7i on both the SE1200 and the
7600.
interface ae0.803 {
mode sparse;
version 2;
}
M7i
x...@xxx-xxx# run show pim neighbors
Instance: PIM.master
[edit]
Redback
[xxx]r1p1#show ip pim ne
PIM Neighbor Table
Neighbor Address Interface Uptime DR Prio GenID DR SR
Expire hex hex Intvl
10.x.x.x UPLINK 00:08:21 1 59ccdf7f
00:01:23
Multicast traffic does flow though. Has anyone come across this? I am
running JUNOS 10.0R1.8.
Best Regards,
V. Vasilev
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
